Match Ported Intake Gaskets, Stage 3 GTV Heads, Pair

EMPI Stage 3 Match Ported Intake Gaskets for GTV Heads

Product Overview

Ensure a precision seal and maximum airflow for your high-performance VW engine with these EMPI Match Ported Intake Gaskets. Specifically designed for Stage 3 GTV heads, these gaskets are precision-cut to match the CNC GTV-2 manifolds. Sold as a pair, they are an essential component for builders looking to eliminate intake turbulence and maintain peak volumetric efficiency in air-cooled Type 1 engines.

Vehicle Fitment and Application

These gaskets are engineered for performance-oriented Volkswagen applications utilizing Stage 3 GTV cylinder heads. They are a perfect fit for:

• VW Beetle and Super Beetle
• VW Karmann Ghia
• VW Bus (Type 2)
• Dune Buggies, Sand Rails, and Woods Buggies

They are compatible with high-flow intake systems often paired with Weber IDF, Dellorto DRLA, or EMPI HPMX carburetor setups where port matching is critical.

Appletree Auto Pro Tech Tips

Check Port Alignment First: Before applying any sealant or bolting down the manifold, dry-fit the gasket against both the cylinder head and the intake manifold. Ensure the gasket opening does not protrude into the air path, as even a small overlap can cause significant turbulence and power loss in Stage 3 heads.

Surface Preparation is Key: Always clean the mating surfaces of the head and manifold with a lint-free cloth and a mild solvent like brake cleaner. Any leftover residue from old gaskets or oil can prevent the new gasket from sealing properly, leading to vacuum leaks that cause a lean running condition.

Torque in Increments: To prevent warping the manifold flange or unevenly crushing the gasket, tighten the intake nuts in small increments. Use a torque wrench to reach the factory specification (typically 14 ft-lbs for 8mm studs) to ensure a uniform seal across the entire port face.