Exhaust System, Single Quiet Muffler for Beetle & Ghia 66-73

EMPI Single Quiet Muffler Exhaust System for VW Beetle and Ghia (1966-1973)

Upgrade Your VW Exhaust Performance

The EMPI Single Quiet Muffler system is one of the most popular precision-designed exhaust upgrades for aircooled Volkswagen enthusiasts. This system features 1 3/8 inch tubing paired with a small 3-bolt muffler flange and classic flared chrome muffler tips. Designed to offer a deep, mellow tone without excessive noise, this kit provides a significant performance boost over stock setups. Each system comes complete with aluminum flex hose and a comprehensive installation kit to ensure a straightforward bolt-on process.

Vehicle Fitment and Specifications

This exhaust system is engineered for Type 1 Beetle and Karmann Ghia models from 1966 through 1973 equipped with 1300cc to 1600cc engines. The header flange is positioned at the 1:00 o clock location for proper clearance. The unit is constructed from raw steel; please be aware that the black coating applied by the manufacturer is intended for rust prevention during storage and transit and is not a permanent finish.

Pro Tech Tips from Appletree Auto

Tip 1: Prepare the Surface. The black paint on this exhaust is strictly for storage protection and will smoke or peel once the system gets hot. For a professional and lasting finish, sand off the storage paint and apply a high-quality, high-temperature header paint or ceramic coating before you install it on your vehicle.

Tip 2: Ensure an Airtight Seal. To prevent annoying exhaust leaks and popping, always use the fresh gaskets included in the installation kit. We recommend checking the torque on your exhaust nuts after the first 50 to 100 miles of driving, as the heat cycles can cause the components to settle.

Tip 3: Check Apron Clearance. Before fully tightening the header and muffler bolts, mock up the system to ensure the chrome tips are centered and clearing the rear apron of your Beetle or Ghia. Adjusting the fitment while the hardware is still slightly loose prevents stress on the exhaust studs and ensures a perfect aesthetic result.