Windshield Glass For Beetle 65-68

OVERVIEW

When it comes to restoring the iconic silhouette of your air-cooled classic, nothing restores clarity and safety quite like a fresh, crystal-clear windshield. This IAP Windshield Glass is engineered specifically for the 1965 through 1977 Volkswagen Standard Beetle Sedan, providing the perfect OEM-spec fit that professional builders and enthusiasts demand. After decades of exposure to road debris, sand-pitting, and wiper scratches, your original glass often becomes a safety hazard, especially during night driving or in direct sunlight. Replacing your worn-out glass with this high-quality laminated unit not only improves the aesthetics of your restoration but also ensures that you have an unobstructed view of the open road, keeping the spirit of the vintage VW culture alive with every mile you drive.

At Appletree Automotive, we understand that structural integrity is just as important as visual clarity. This windshield is manufactured using modern laminated safety glass standards, meaning it consists of two layers of glass with a specialized interlayer that prevents shattering upon impact. This is a significant upgrade over aged, original glass that may have become brittle over time. Designed to fit the larger window opening introduced in 1965, this glass provides the expansive visibility that defined the later years of the Type 1 Beetle. Whether you are performing a concours-level restoration or simply maintaining your daily driver, this windshield offers the durability and precision fitment required to seal out the elements and protect your interior from water damage and wind noise.

FITMENT

This windshield glass is designed for the following Volkswagen Type 1 models:VW Beetle (Standard Sedan): 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977. Note: This glass is specifically for Standard Beetles and will NOT fit Super Beetle (1302/1303) models or Convertible models.

SPECS

• Part Number: 113-845-101D
• Material: Laminated Safety Glass (Two-ply with vinyl interlayer).
• Color/Tint: Clear.
• Style: Flat Glass (Standard Beetle Specification).
• Weight: Approximately 14 lbs.
• Dimensions: Precision cut to factory 1965-1977 window aperture dimensions.
• Safety Rating: Meets or exceeds Department of Transportation (DOT) standards for automotive safety glass.

PRO TIPS

1. Always Use a New German Quality Seal

When replacing your windshield, never attempt to reuse an old, hardened rubber seal. A fresh, high-quality rubber seal is essential for a leak-free installation. We highly recommend using a German-style seal with the proper molding groove if your Beetle originally came with trim. Before installation, apply a liberal amount of dish soap or specialized tire mounting lube to the groove of the seal and the body flange. This lubrication is the secret to a smooth "rope-in" process and prevents the rubber from tearing or binding against the metal pinch weld of the body.

2. Master the Rope-In Technique

The safest way to install VW glass is the classic "rope-in" method. Use a sturdy, thin nylon cord (about 1/4 inch thick) and wrap it entirely around the inner groove of the rubber seal, overlapping the ends at the bottom center. With one person applying firm, even pressure from the outside, the person on the inside slowly pulls the cord, which "flips" the rubber lip over the metal body flange. Take your time and work in small increments; if you feel too much resistance, stop and adjust the glass position. Never use metal screwdrivers or pry bars against the edge of the glass, as this is the most common cause of stress cracks during installation.

3. Inspect and Prep the Pinch Weld

Before the new glass ever touches the car, take a close look at the metal pinch weld where the seal sits. It is common for water to trap behind old seals, leading to "window channel rot." Clean the area thoroughly with a wire brush and treat any surface rust with a quality rust inhibitor or primer. If the pinch weld is uneven or pitted, the new seal won''t sit flush, which leads to annoying wind whistles and water leaks. Ensuring a smooth, clean, and painted mounting surface will extend the life of your new windshield and protect your Beetle''s body for years to come.