Condenser, for 009 Distributors, Bosch Brand

Bosch Ignition Condenser for 009 VW Distributors

Product Overview

The Bosch 02086 condenser is a critical ignition component specifically designed for the iconic 009 centrifugal advance distributor. As a genuine Bosch part distributed by EMPI, it ensures your air-cooled Volkswagen maintains a consistent spark by absorbing the primary circuit's self-induced voltage, preventing premature point wear and electrical arcing.

Vehicle & Distributor Fitment

This condenser is engineered exclusively for use with the Bosch 009 (AC905501) and similar non-vacuum advance distributors. These are the most common performance upgrades found on VW Beetles, Karmann Ghias, Type 2 Buses, and custom Dune Buggies. Before ordering, verify that your distributor is a 009 model, as standard vacuum-advance units typically require a different lead length and mounting bracket configuration.

Appletree Pro Tech Tips

Ensure a Solid Ground: The metal body of the condenser serves as the electrical ground for the component. Before tightening the mounting screw, ensure the distributor housing is clean and free of rust or oil. A poor ground connection is a leading cause of intermittent ignition failure and "misfiring" under load.

Inspect Points for Pitting: When replacing a condenser, always inspect the ignition points. If you notice a "peak and valley" (pitting) on the contact surfaces, it is a sign that the previous condenser was failing or had the wrong capacity. For the best results and timing accuracy, we recommend replacing the points and condenser as a matched set.

Proper Lead Routing: When installing the green wire lead to the terminal, ensure it is routed so it does not interfere with the distributor cap seating or the movement of the centrifugal weights inside. A pinched wire can cause a direct short to ground, leaving you stranded with no spark.