Wheel Cap, EMPI Logo, 37mm for 10-1092, 10-1093 & 10-1094

OVERVIEW

When you are finishing a high-end restoration or simply cleaning up your weekend cruiser, it is the small details that elevate a build from average to award-winning. These genuine EMPI 37mm wheel cap logos are the essential finishing touch for enthusiasts running classic EMPI-style wheels. Over years of heat cycles, road grit, and exposure to the elements, original wheel cap emblems can become pitted, faded, or even fall off entirely, leaving your wheels looking unfinished. This set of four precision-crafted logos allows you to restore that iconic EMPI branding to your center caps, ensuring your Volkswagen maintains its period-correct performance aesthetic. Whether you are sporting 8-spoke, 5-spoke, or Riviera-style wheels, these logos provide the crisp, sharp detail that signifies quality and heritage in the air-cooled community.

Designed specifically to integrate with EMPI cap part numbers 10-1092, 10-1093, and 10-1094, these 37mm inserts are manufactured to withstand the rigors of the road while maintaining their high-contrast finish. The EMPI logo is more than just a brand; it is a symbol of decades of Volkswagen racing and street performance history. By replacing your worn or missing emblems with these high-quality inserts, you are protecting your investment and ensuring that every angle of your vehicle reflects a commitment to excellence. At Appletree Automotive, we understand that "good enough" never is, which is why we provide these authentic replacement components to keep your VW looking its absolute best on the street, at the show, or on the track.

FITMENT

These 37mm EMPI logos are designed to fit the recessed centers of specific EMPI wheel caps. While they are universal to the caps listed below, they are most commonly found on wheels fitted to the following vehicles:

• VW Beetle (Type 1): 1950 through 1979 (Standard and Super Beetle)
• VW Karmann Ghia: 1956 through 1974
• VW Bus (Type 2): 1950 through 1979 (Split Window and Bay Window)
• VW Type 3: 1961 through 1973 (Squareback, Fastback, Notchback)
• VW Thing (Type 181): 1973 through 1974
• Custom Applications: Fits any EMPI wheel utilizing cap part numbers 10-1092, 10-1093, or 10-1094

SPECS

Technical specifications for the 00-9665-0 EMPI Wheel Cap Logo Set:

• Logo Diameter: 37mm (Approx. 1.45 inches)
• Compatibility: Specifically engineered for EMPI Caps 10-1092, 10-1093, and 10-1094
• Quantity: Sold as a complete set of 4 (Four) logos
• Logo Design: Classic EMPI Shield/Logo branding
• Material: High-grade durable material with weather-resistant coating
• Installation Type: Adhesive-backed for secure fitment into cap recesses
• Weight: 0.05 lbs (shipping weight)

PRO TIPS

1. Surface Preparation is Paramount

Before you even think about peeling the backing off these new logos, you must ensure the receiving surface of the wheel cap is surgically clean. Use a high-quality wax and grease remover or 90% isopropyl alcohol to wipe down the recessed area of the cap. Even a tiny amount of brake dust, road film, or old adhesive residue will prevent the new logo from bonding correctly. If there is old glue left behind, use a plastic scraper or a mild adhesive remover to get down to the bare metal or plastic. If the surface isn''t perfectly clean, the centrifugal force of the spinning wheel combined with road heat will eventually cause the logo to fly off.

2. Manage Your Installation Temperature

Adhesives are chemically engineered to bond best at specific temperatures. Don''t attempt to install these logos in a cold garage or on a freezing day. For the strongest permanent bond, both the wheel caps and the logos should be at least 70 degrees Fahrenheit (21 degrees Celsius). You can use a hair dryer or a heat gun on a very low setting to gently warm the wheel cap surface before application. This "activates" the adhesive and allows it to flow into the microscopic pores of the surface, creating a much more robust connection that won''t fail during high-speed driving or through car washes.

3. The Center-Press Technique

When applying the 37mm logo, do not just slap it on and hope for the best. Start by lightly touching the center of the logo to the center of the cap recess to ensure it is perfectly aligned. Once you are happy with the positioning, press firmly from the center and work your thumb in a circular motion outward toward the edges. This technique pushes any trapped air bubbles out from under the logo. Once seated, apply firm, steady pressure for at least 30 to 60 seconds. It is also a smart move to let the adhesive cure for 24 hours before taking the car out for a high-speed run or exposing the wheels to water.