- 8% less
Regular Product
Super Shroud, 36hp Style, Black
00-8679-0
These early style Super Shrouds deliver more air volume for increased cooling capacity. Internal fin shapes and placements were optimized using Computational Fluid Dynamics (CFD) software and empirical flow bench testing. 3D scans of multiple engine cases and tins were used to ensure the best fitment possible. Plus, the Super Shroud can accommodate your choice of stock (28-30mm) or thicker (37mm) fans.
The EMPI Super Shroud features multiple elements that have been completely redesigned for a cleaner, OE Style look while delivering improved engine performance and longevity when compared to OEM shrouds including:
Added Velocity Stack Inlet, mimicking the Porsche 356 OEM shroud, to increase airflow into the shroud and deliver more cooling efficiency.
Enhanced air balance across the engine, OE-style and existing aftermarket shrouds are typically imbalanced, favoring the passenger side (1 & 2 cylinders) versus the driver side (3 & 4 cylinders). This imbalance can lead to inconsistent heating between the sides of the motor. The EMPI Super Shroud corrects the imbalance while still delivering increased airflow across both sides of the engine.
Extended cooling fin tips to simulate the OEM thermostat vanes; while many OEM thermostats have been deleted or no longer function properly, EMPI engineers extended these tips to replicate thermostat functionality in the on position.
Improved fan shroud fitment on OEM and bubbletop engine cases for easier installation and a better seal to the engine tin when compared to previous EMPI shrouds.
Horizontal alignment of the alternator bolt holes and removal of unnecessary holes makes for a better-looking shroud that contains the airflow more completely.
Extensive testing confirms that the EMPI Super Shroud delivers:
7% more total air flow than previous EMPI non-doghouse shrouds (w/either fan)
14% more cooling air CFM (cubic feet per minute) output than OE Style Shroud (w/30mm fan)
37% more cooling air CFM output than OE Style Shroud (w/37mm fan)
42% more engine cooling capacity when using a remote oil cooler and 37mm fan versus OE-style oil cooler in an OE-style shroud
The EMPI Super Shroud features multiple elements that have been completely redesigned for a cleaner, OE Style look while delivering improved engine performance and longevity when compared to OEM shrouds including:
Added Velocity Stack Inlet, mimicking the Porsche 356 OEM shroud, to increase airflow into the shroud and deliver more cooling efficiency.
Enhanced air balance across the engine, OE-style and existing aftermarket shrouds are typically imbalanced, favoring the passenger side (1 & 2 cylinders) versus the driver side (3 & 4 cylinders). This imbalance can lead to inconsistent heating between the sides of the motor. The EMPI Super Shroud corrects the imbalance while still delivering increased airflow across both sides of the engine.
Extended cooling fin tips to simulate the OEM thermostat vanes; while many OEM thermostats have been deleted or no longer function properly, EMPI engineers extended these tips to replicate thermostat functionality in the on position.
Improved fan shroud fitment on OEM and bubbletop engine cases for easier installation and a better seal to the engine tin when compared to previous EMPI shrouds.
Horizontal alignment of the alternator bolt holes and removal of unnecessary holes makes for a better-looking shroud that contains the airflow more completely.
Extensive testing confirms that the EMPI Super Shroud delivers:
7% more total air flow than previous EMPI non-doghouse shrouds (w/either fan)
14% more cooling air CFM (cubic feet per minute) output than OE Style Shroud (w/30mm fan)
37% more cooling air CFM output than OE Style Shroud (w/37mm fan)
42% more engine cooling capacity when using a remote oil cooler and 37mm fan versus OE-style oil cooler in an OE-style shroud
Regular Product
These early style Super Shrouds deliver more air volume for increased cooling capacity. Internal fin shapes and placements were optimized using Computational Fluid Dynamics (CFD) software and empirical flow bench testing. 3D scans of multiple engine cases and tins were used to ensure the best fitment possible. Plus, the Super Shroud can accommodate your choice of stock (28-30mm) or thicker (37mm) fans.
The EMPI Super Shroud features multiple elements that have been completely redesigned for a cleaner, OE Style look while delivering improved engine performance and longevity when compared to OEM shrouds including:
Added Velocity Stack Inlet, mimicking the Porsche 356 OEM shroud, to increase airflow into the shroud and deliver more cooling efficiency.
Enhanced air balance across the engine, OE-style and existing aftermarket shrouds are typically imbalanced, favoring the passenger side (1 & 2 cylinders) versus the driver side (3 & 4 cylinders). This imbalance can lead to inconsistent heating between the sides of the motor. The EMPI Super Shroud corrects the imbalance while still delivering increased airflow across both sides of the engine.
Extended cooling fin tips to simulate the OEM thermostat vanes; while many OEM thermostats have been deleted or no longer function properly, EMPI engineers extended these tips to replicate thermostat functionality in the on position.
Improved fan shroud fitment on OEM and bubbletop engine cases for easier installation and a better seal to the engine tin when compared to previous EMPI shrouds.
Horizontal alignment of the alternator bolt holes and removal of unnecessary holes makes for a better-looking shroud that contains the airflow more completely.
Extensive testing confirms that the EMPI Super Shroud delivers:
7% more total air flow than previous EMPI non-doghouse shrouds (w/either fan)
14% more cooling air CFM (cubic feet per minute) output than OE Style Shroud (w/30mm fan)
37% more cooling air CFM output than OE Style Shroud (w/37mm fan)
42% more engine cooling capacity when using a remote oil cooler and 37mm fan versus OE-style oil cooler in an OE-style shroud
The EMPI Super Shroud features multiple elements that have been completely redesigned for a cleaner, OE Style look while delivering improved engine performance and longevity when compared to OEM shrouds including:
Added Velocity Stack Inlet, mimicking the Porsche 356 OEM shroud, to increase airflow into the shroud and deliver more cooling efficiency.
Enhanced air balance across the engine, OE-style and existing aftermarket shrouds are typically imbalanced, favoring the passenger side (1 & 2 cylinders) versus the driver side (3 & 4 cylinders). This imbalance can lead to inconsistent heating between the sides of the motor. The EMPI Super Shroud corrects the imbalance while still delivering increased airflow across both sides of the engine.
Extended cooling fin tips to simulate the OEM thermostat vanes; while many OEM thermostats have been deleted or no longer function properly, EMPI engineers extended these tips to replicate thermostat functionality in the on position.
Improved fan shroud fitment on OEM and bubbletop engine cases for easier installation and a better seal to the engine tin when compared to previous EMPI shrouds.
Horizontal alignment of the alternator bolt holes and removal of unnecessary holes makes for a better-looking shroud that contains the airflow more completely.
Extensive testing confirms that the EMPI Super Shroud delivers:
7% more total air flow than previous EMPI non-doghouse shrouds (w/either fan)
14% more cooling air CFM (cubic feet per minute) output than OE Style Shroud (w/30mm fan)
37% more cooling air CFM output than OE Style Shroud (w/37mm fan)
42% more engine cooling capacity when using a remote oil cooler and 37mm fan versus OE-style oil cooler in an OE-style shroud
SHIPPING: Free shipping on all orders exceeding $74.99. All orders under $74.99 will be shipped for a flat fee of $9.99 Or $6.99 for orders less than $24.99. Shipping rates are for the 48 continental United States. Areas outside the 48 states, shipping will be calculated using the best shipping price available. We reserve the right to use any shipping carrier unless the order has had a upgrade. If any sales or price matching discount drops you below the free shipping amount, shipping will be charged.
We accept the following payment methods:
To replace this text with your store's actual info on payment methods, go to "Catalog -> Product tabs" and edit the Payment methods page.
RETURNS: Returns will be accepted within 30 days of receipt. If the item was shipped via Free Shipping, the shipping charges may be deducted from your return. Please print the original invoice and include it with the return. No returns on custom built or special ordered merchandise.
PLEASE NOTE: We do not pay for return shipping unless the item received is incorrect. If you have ordered the wrong part, we are happy to take it back but we do not cover the shipping cost.
Customers who bought this product also bought
- 8% less
Regular Product870-10
Residual Pressure Valve Drum Brakes, 10LB Only 19 left in stock.In Stock, Ready To Ship
Customers who viewed this product also bought
- 8% less
- 8% less
Regular Product16-9434-0
009 Condenser, for 009 & EMPI Distributors, Each Only 1 left in stock.In Stock, Ready To Ship
- 8% less
- 8% less
Regular Product131-415-813E
Tie Rod End, Ball Joint Right Inner, Beetle & Ghia 68-77 Only 2 left in stock.In Stock, Ready To Ship
- 8% less
Regular Product113-903-515
Generator Brush Set, 12 Volt, for Aircooled VW Only 11 left in stock.In Stock, Ready To Ship
