Gt-5 Wheels All Chrome, 5.5 Wide, 5 on 205mm

OVERVIEW

Elevate your vintage Volkswagen''s aesthetic and performance with the GT-5 All-Chrome Wheel Set. These iconic wheels are designed for the enthusiast who demands a classic "Period Correct" look paired with the brilliant, mirror-like finish of modern high-quality chrome plating. The GT-5 design is a timeless staple in the air-cooled community, offering a deep-dish five-spoke appearance that instantly transforms the stance of any Beetle, Bus, or Ghia. These wheels don''t just sit on your car; they command attention, reflecting the heritage of the California Look while providing the structural integrity needed for modern street driving. Whether you are finishing a ground-up restoration or simply giving your weekend cruiser a much-needed facelift, this set of four wheels provides a cohesive, show-ready appearance right out of the box.

Engineering meets style in these 15-inch by 5.5-inch cast aluminum wheels. By utilizing a 5 on 205mm bolt patterncommonly known as the "Wide 5"these wheels are a direct fit for early model Volkswagens, allowing you to maintain your original drum or disc brake configuration without the need for cumbersome adapters. The 5.5-inch width is the "sweet spot" for air-cooled applications, offering enough surface area for a wider footprint and improved handling stability while still fitting comfortably under most stock fender wells. Each wheel comes complete with its own center cap and valve stem, ensuring you have the essential components to get your new rubber mounted and your VW back on the pavement with a look that is as durable as it is dazzling.

FITMENT

These GT-5 wheels feature the classic 5 on 205mm "Wide 5" bolt pattern. They are designed to fit the following air-cooled models with stock-style 5-lug hubs:

• VW Beetle (Standard): 1946 through 1966
• VW Karmann Ghia: 1956 through 1966
• VW Bus (Type 2 / Transporter / Kombi): 1950 through 1970
• VW Type 3 (Squareback, Fastback, Notchback): 1961 through 1965
• Dune Buggies & Sand Rails: Any custom chassis utilizing 5 on 205mm Wide 5 drums or disc brake rotors.
• Replica Kit Cars: Speedster and Spyder replicas using vintage VW pans and 5-lug wide patterns.

SPECS

Every detail of the GT-5 wheel is manufactured to exacting standards to ensure a perfect balance of weight and strength.

• Quantity: Set of 4 Wheels
• Diameter: 15 Inches
• Width: 5.5 Inches
• Bolt Pattern: 5 on 205mm (Wide 5)
• Backspacing: 4 Inches
• Offset: Approximately +20mm
• Finish: Full Show-Quality Chrome
• Material: Heavy-Duty Cast Aluminum Alloy
• Lug Seat: 60-Degree Taper (Requires specialized lugs)
• Center Bore: Designed for standard VW Wide 5 hubs
• Included Accessories: 4 Chrome Center Caps and 4 Valve Stems
• Recommended Lug Hardware: Part numbers 00-9537-0 (Lugs) & 00-9516-0 (Nuts)

PRO TIPS

1. Use the Correct Lug Hardware or Risk Damage

One of the most common mistakes when installing aftermarket aluminum wheels like the GT-5 is attempting to reuse the original factory VW lug bolts. Stock VW lugs feature a "Ball Seat" (radiused) design intended for steel wheels. These GT-5 wheels require a 60-degree "Taper Seat" (cone) lug. Using the wrong seat profile will prevent the wheel from centering properly, lead to vibration, and will eventually gall the aluminum seating surface, potentially causing the wheel to come loose. Always invest in a fresh set of 60-degree taper lugs (12mm) to ensure your investment stays securely fastened to your hubs.

2. Mind Your Fender Clearance on Lowered Cars

While the 5.5-inch width is a standard upgrade, the 4-inch backspacing pushes the outer lip of the wheel slightly further toward the fender edge than a stock 4-inch steel wheel. If your VW is significantly lowered with a narrowed beam or dropped spindles, you must carefully check your tire-to-fender clearance. We recommend a 145/80R15 or 165/80R15 tire for the front to avoid rubbing during tight turns. If you are running a stock height or mildly lowered car, a 185/65R15 or 195/65R15 in the rear provides a great "big and little" staggered look while maintaining excellent traction.

3. Maintain That Chrome Brilliance

Chrome wheels look incredible, but they require specific care to prevent pitting and oxidation, especially in coastal areas or humid climates. Never clean your GT-5 wheels while they are hot from driving, as the rapid temperature change can stress the plating. Avoid using harsh, acid-based wheel cleaners which can "cloud" the finish over time. Instead, use a pH-neutral automotive soap and a soft microfiber mitt. Once cleaned and dried, apply a high-quality synthetic wheel sealant or carnauba wax to create a barrier against brake dust and moisture. This extra five minutes of maintenance will keep your wheels looking brand new for years to back.