ALUMINUM DASHES

We precision cut these panels from thick aluminum sheet then bead roll in from the edges for strength. These are a perfect match for our aluminum door panels. Fits type 1 58-64

We precision cut these panels from thick aluminum sheet then bead roll in from the edges for strength. These are a perfect match for our aluminum door panels. Fits type 1 65 and up except super beetle

Chrome

All large holes are 3 1/8 inches inches ID. All of the small holes are 2 1/16 inches inches dash panels are drilled and tapped 6mm-1.0 on the backside for mounting

Chrome

All large holes are 3 1/8 inches ID. All of the small holes are 2 1/16 inches dash panels are drilled and tapped 6mm-1.0 on the backside for mounting

Aluminum

all large holes are 3 1/8 inches inches id. All of the small holes are 2 1/16 inches inches dash panels are drilled and tapped 6mm-1.0 on the backside for mounting

Chrome

All large holes are 3 1/8 inches inches ID. All of the small holes are 2 1/16 inches inches dash panels are drilled and tapped 6mm-1.0 on the backside for mounting

Aluminum

All large holes are 3 1/8 inches ID. All of the small holes are 2 1/16 inches dash panels are drilled and tapped 6mm-1.0 on the backside for mounting

Aluminum

All large holes are 3 1/8 inches inches ID. All of the small holes are 2 1/16 inches inches dash panels are drilled and tapped 6mm-1.0 on the backside for mounting

Aluminum

all large holes are 3 1/8 inches inches id. All of the small holes are 2 1/16 inches inches dash panels are drilled and tapped 6mm-1.0 on the backside for mounting

Chrome

All large holes are 3 1/8 inches ID. All of the small holes are 2 1/16 inches dash panels are drilled and tapped 6mm-1.0 on the backside for mounting

Chrome

All large holes are 3 1/8 inches ID. All of the small holes are 2 1/16 inches dash panels are drilled and tapped 6mm-1.0 on the backside for mounting