VALVE SPRINGS

Valve springs lose tension after years of service, resulting problems can include low compression and burnt exhaust valves. These new springs are a must for all stock valve jobs.

OEM NUMBER:
113-109-623C

Engine: 1200-1600cc VW
Seat Pressure: 144lbs
Quantity: Sold Each

The enthusiast looking for increased rpm range needs these specially processed silicon steel springs to insure against fatigue and breakage.

This set is single springs systems

Engine: 1200-1600cc
Seat Pressure: 166lbs
Quantity: 8 Pieces

Solve all your valve spring problems at one time by ordering our carefully selected valve spring retainer and lock combinations.

Includes:
-8 Aluminum Retainers
-8 Valve Springs
-8 Pairs of Keepers


Engine: 1200-1600cc
Seat Pressure: 166lbs
Springs: Single System

Insure against valve spring fatigue and breakage. Stop the valve float with the best valve springs on the market. Hand checked and magnafluxed for top quality.

Outer Spring: 1.246 inches .153 inches wire diameter
Inner Spring: .910 inches .113 wire diameter

They will lift .630 inches and more with a coil bind at .800 inches

NOTE: Valve guide boss must be machined for dual springs.

Engine: All Aircooled Type 1
Quantity: Complete Set of 8

Insure against valve spring fatigue and breakage. Stop the valve float with the best valve springs on the market. Hand checked and magnafluxed for top quality.

Outer Spring: 1.246 inches .153 inches wire diameter
Inner Spring: .910 inches .113 wire diameter

They will lift .630 inches and more with a coil bind at .800 inches

Kits includes Chromoly Retainers and Hardened Valve Locks

NOTE: Valve guide boss must. be machined for dual springs.

Engine: All Aircooled Type 1
Quantity: Complete Set

Hardened valve spring shims for setting proper spring height. Provides excellent seat surface for high pressure springs by preventing cutting into the heads.

NOTE: These are for single spring setups

Engine: All Air Cooled Type 1
Thickness: .015
Quantity: 8 Piece

Hardened valve spring shims for setting proper spring height. Provides excellent seat surface for high pressure springs by preventing cutting into the heads.

NOTE: These are for single spring setups

Engine: All Air Cooled Type 1
Thickness: .030
Quantity: 8 Piece

Hardened valve spring shims for setting proper spring height. Provides excellent seat surface for high pressure springs by preventing cutting into the heads.

NOTE: These are for single spring setups

Engine: All Air Cooled Type 1
Thickness: .060
Quantity: 8 Piece

Hardened valve spring shims for setting proper spring height. Provides excellent seat surface for high pressure springs by preventing cutting into the heads.

NOTE: These are for DUAL spring setups

Engine: All Air Cooled Type 1
Thickness: .015
Quantity: 8 Piece

Hardened valve spring shims for setting proper spring height. Provides excellent seat surface for high pressure springs by preventing cutting into the heads.

NOTE: These are for DUAL spring setups

Engine: All Air Cooled Type 1
Thickness: .030
Quantity: 8 Piece

Hardened valve spring shims for setting proper spring height. Provides excellent seat surface for high pressure springs by preventing cutting into the heads.

NOTE: These are for DUAL spring setups

Engine: All Air Cooled Type 1
Thickness: .060
Quantity: 8 Piece

The enthusiast looking for increased rpm range needs these specially processed silicon steel springs to insure against fatigue and breakage. This set is for DUAL springs systems Engine: 1200-1600cc Seat Pressure: 166lbs Quantity: 16 Pieces