Super Amber Indicator Light, 7/8 Diameter, 9/16 Lens, Each

OVERVIEW

When you''re tearing through the dunes or pushing your air-cooled VW to the limit on the track, the last thing you want to do is squint at a tiny, dim factory warning light. The EMPI Super Amber Indicator Light is engineered specifically for high-visibility applications where instant recognition is critical. Featuring a massive 9/16-inch protruding lens and a 7/8-inch outer bezel, this light is significantly larger and brighter than standard dash indicators. Whether you are monitoring oil pressure, alternator charging, or turn signal activation, the vibrant amber glow cuts through dust, glare, and vibration, ensuring you stay informed about your vehicle''s vitals without taking your eyes off the path for more than a split second. At Appletree Automotive, we know that reliability in the rough stuff starts with components you can actually see, and this heavy-duty indicator is a staple for any serious custom dashboard build.

Installation is straightforward but provides a professional, "competition-ready" look to any cockpit. Designed to fit into a 3/4-inch diameter opening, these lights are perfect for custom aluminum dash panels, fiberglass buggy shells, or modified stock Volkswagen dashboards. The robust construction is built to withstand the harsh environments typical of Baja Bugs and sand rails, resisting the constant jarring of off-road use. While many modern LED substitutes lack the classic aesthetic and wide-angle diffusion of a traditional high-output indicator, this EMPI unit maintains that iconic air-cooled era look while providing "super" sized performance. Don''t settle for standard-sized lights that disappear in the sunlight; upgrade to the Super Amber series and give your VW the professional-grade monitoring system it deserves.

FITMENT

This indicator light is a universal 12-volt component commonly used in the following applications:

• VW Beetle (All Years): Perfect for custom dash layouts or auxiliary warning systems.
• VW Karmann Ghia: Ideal for upgraded electrical systems and custom gauge clusters.
• VW Bus / Type 2: Highly visible even in the large cabin area of a Transporter or Camper.
• VW Type 3 (Squareback, Fastback, Notchback): A great addition for modified street builds.
• VW Thing (Type 181): Rugged enough for open-air military-style cockpits.
• Dune Buggies & Sand Rails: The industry standard for fiberglass Manx-style bodies and tube chassis rails.
• Baja Bugs: Essential for high-vibration off-road racing environments.
• Custom Hot Rods: Fits any 12V system requiring a 3/4-inch mounting hole.

SPECS

• Brand: EMPI
• Part Number: 00-9378-0
• Lens Color: Super Amber / Orange
• Lens Diameter: 9/16 Inch (Protruding for maximum visibility)
• Bezel/Face Diameter: 7/8 Inch
• Required Mounting Hole: 3/4 Inch
• Voltage: 12-Volt DC System
• Housing Material: Impact-resistant heavy-duty composite and metal
• Terminal Type: Standard male spade connectors for easy wiring
• Quantity: Sold Individually (Each)

PRO TIPS

Tip 1: Ensure a Solid Ground in Fiberglass Bodies

If you are installing this EMPI indicator light into a fiberglass dune buggy or a plastic dash panel, remember that the light cannot ground through the mounting surface like it might on a steel Beetle dash. You must run a dedicated ground wire from the negative terminal of the light to a clean, unpainted spot on the chassis. Poor grounding is the number one cause of flickering or dim indicator lights in the air-cooled world, so taking the time to crimp a proper ground lead will save you hours of troubleshooting later.

Tip 2: Use Amber for Specific Warning Designations

In the world of automotive wiring standards, color coding your indicators helps your brain react faster during an emergency. We typically recommend using these Super Amber lights for turn signals or secondary warnings like a "Fan Fail" or "Low Fuel" light. Since Red is usually reserved for critical "Stop Immediately" failures like Oil Pressure or Alternator charging, using the Amber light for high-priority but non-catastrophic notifications allows you to distinguish the severity of an issue at a glance while you''re bouncing through a wash.

Tip 3: Perfecting the Hole Cut for a Snug Fit

The 3/4-inch mounting hole requirement is precise. When prepping your dash, we highly recommend using a step-drill bit (often called a Unibit) rather than a standard twist drill, especially when working with thin sheet metal or fiberglass. A step-drill creates a perfectly round hole without "walking" or tearing the material. Once the hole is drilled, use a small round file to de-burr the edges before sliding the light in. This prevents the metal edges from cutting into the light''s housing and ensures the 7/8-inch bezel sits perfectly flush against the dash surface for a clean, professional finish.