Seat Belt, Retractable Stock Style, 2 Point, Black

EMPI Retractable 2-Point Stock Style Seat Belts - Black

VW Fitment & Application

These EMPI 2-point retractable lap belts are designed for a universal fit in classic air-cooled Volkswagens, specifically the VW Beetle, Karmann Ghia, and Type 3. They are engineered to bolt directly into the stock factory anchor locations found on the floor pan and center tunnel. These belts provide a period-correct look while offering the modern convenience of a retractable mechanism. Each set is sold as a pair and includes the necessary mounting hardware to refresh both the driver and passenger sides of your vehicle.

Pro Tech Tips for Your VW Seat Belt Installation

Clean and Chase Your Threads: Before attempting to bolt in your new belts, use a thread chaser or a wire brush to clean out the factory mounting holes in the floor and tunnel. Decades of dirt, carpet fibers, or rust can make bolt installation difficult. Ensuring the threads are clean allows you to achieve the proper torque required for safety components.

Check Retractor Orientation: For the retractable mechanism to operate smoothly, the housing must be mounted in a perfectly upright or level position. If the retractor is tilted at an extreme angle, the internal gravity-locking safety mechanism may engage, preventing the belt from pulling out. Always test the retraction motion before fully tightening the mounting hardware.

Avoid Harsh Chemical Cleaners: To maintain the strength and color of the 2-inch black webbing, never use bleach or strong industrial solvents for cleaning. These chemicals can break down the synthetic fibers over time, compromising the integrity of the belt. Use a mild soap and warm water solution, and allow the belts to air dry completely while fully extended.