Cable Holder, 3 Wire

OVERVIEW

When it comes to the longevity and reliability of your air-cooled Volkswagen engine, cable management is an often-overlooked detail that can make or break your ignition system''s performance. The EMPI 3-Wire Cable Holder, engineered to meet the specifications of the original factory part number 113-905-451A, is an essential component for any serious restoration, daily driver maintenance, or high-performance build. In the high-vibration and high-heat environment of a VW engine bay, loose spark plug wires are more than just an eyesore; they are a mechanical liability. Without proper retention, ignition wires can vibrate against the sharp metal edges of the fan shroud or, worse, come into contact with the scorching heat of the cylinder heads and exhaust system. This 3-wire holder ensures that your ignition leads remain exactly where the original engineers intended, maintaining the critical distance needed to prevent insulation failure and ensuring a clean, organized look that reflects the quality of your craftsmanship.

This specific cable holder is designed to snap directly into the pre-drilled factory holes of your fan shroud, providing a secure, tool-free anchor point for up to three wires. Whether you are finishing a concourse-level restoration on a Type 1 Beetle, prepping a Type 2 Bus for a cross-country trek, or tidying up the engine of a Type 3, these clips are the key to a professional-grade engine bay. They are manufactured from a high-grade, heat-stabilized composite material specifically chosen to withstand the constant thermal cycling of an air-cooled engine without becoming brittle or snapping like inferior modern plastics. By utilizing these holders, you eliminate the risk of ignition "cross-fire" caused by wires rubbing together and ensure that your cooling air flow remains unobstructed by messy, dangling leads. Don''t settle for zip-ties that look cheap and can cut into your wire insulation; invest in the correct hardware that keeps your VW running cool, efficient, and looking factory-fresh.

FITMENT

• Volkswagen Beetle (Type 1): 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979
• Volkswagen Super Beetle: 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979
• Volkswagen Bus (Type 2): 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979
• Volkswagen Type 3 (Fastback, Squareback, Notchback): 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974
• Volkswagen Karmann Ghia: 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974
• Volkswagen Thing (Type 181): 1973, 1974

SPECS

• Manufacturer: EMPI
• OEM Cross Reference: 113-905-451A (113905451A)
• Wire Capacity: Holds up to 3 individual wires
• Compatibility: Designed for standard 7mm spark plug wires
• Material: Heat-resistant high-impact nylon composite
• Mounting Style: Snap-in "Push-Pin" style for fan shroud mounting
• Color: Black (OE Factory Finish)
• Quantity: Sold Each

PRO TIPS

1. Prep the Shroud Holes for a Perfect Snap

Before installing your new cable holders, take a moment to inspect the mounting holes in your fan shroud. If you have recently painted or powder-coated your shroud, the holes may be slightly smaller than the factory diameter due to the thickness of the coating. Use a small round file or a drill bit to gently clear any excess paint from the hole. This ensures the "wings" of the plastic holder can fully expand behind the metal, preventing the holder from vibrating loose or popping out during high-RPM operation. A drop of silicone spray on the mounting tab can also help it slide into place without stressing the plastic.

2. Verify Wire Diameter Before Installation

These holders are specifically designed for 7mm spark plug wires, which were the factory standard for air-cooled Volkswagens. While they can sometimes be "massaged" to fit 8mm high-performance wires, doing so puts excessive stress on the plastic clips and can lead to premature failure. If you are running 8mm or 8.5mm wires, we recommend using a dedicated performance wire loom. For those running stock-style 7mm wires, these holders are the absolute best choice for a snug, non-slip fit that prevents the wires from sliding back and forth through the holder while you are driving.

3. Optimize Your Ignition Routing