Wiper Blade, 10 Long, Black, for Beetle 58-64, Bus 50-67

OVERVIEW

When it comes to maintaining your vintage Volkswagen, visibility isn''t just a matter of convenience; it''s a critical safety requirement. This EMPI 10-inch black wiper blade is engineered specifically for the unique windshield curvatures and wiper arm tensions of early air-cooled models. Designed to replace worn-out or streaking blades on 1958 through 1964 Beetles and 1950 through 1967 Split Window Buses, this component ensures a crisp, clean sweep every time the clouds open up. The black finish provides a sleek, understated look that complements both stock restorations and custom Cal-look builds, offering a durable alternative to the original silver-satin finishes that often succumb to pitting and corrosion over time. Don''t let a sudden rain shower turn your Sunday drive into a stressful ordeal when a high-quality, period-correct replacement is just a click away.

Constructed with a heavy-duty steel frame and a high-grade rubber wiping element, this blade is built to withstand the rigors of the road. Vintage VW windshields are often smaller and more vertical than modern glass, requiring a blade that maintains consistent pressure without lifting at higher speeds. This 10-inch unit (250mm) is the exact length required to maximize your field of vision without overextending past the glass trim or putting undue strain on your 6-volt or early 12-volt wiper motor. Whether you are finishing a ground-up restoration on a 1964 Bug or keeping a 1955 Barnfind Bus road-legal, these EMPI blades offer the reliability and fitment that air-cooled enthusiasts have trusted for decades. Sold individually, these blades are an essential addition to any glovebox or tool kit for the prepared Volkswagen owner.

FITMENT

This 10-inch black wiper blade is designed for the following Volkswagen models and year ranges:

• Volkswagen Beetle (Type 1): 1958, 1959, 1960, 1961, 1962, 1963, 1964
• Volkswagen Bus (Type 2 / Transporter / Kombi): 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967 (Split Window Models)
• Karmann Ghia: Fitment varies by arm style; please verify arm attachment and length before ordering for Ghia models.

SPECS

• Length: 10 Inches (approx. 250mm)
• Color/Finish: Stealth Black
• Frame Material: Corrosion-resistant stamped steel
• Wiper Material: High-density ozone-resistant rubber
• Attachment Style: Slide-on / Pin style (Compatible with OEM VW arms for specified years)
• OEM Cross Reference: 113-955-425B
• Quantity: Sold Individually (Two required for most vehicles)
• Manufacturer: EMPI

PRO TIPS

1. Clean Your Glass Before Installation

One of the most common reasons for premature wiper failure is "road film" and industrial fallout that accumulates on vintage glass. Before installing your new EMPI blades, use a high-quality glass cleaner and a clay bar to remove microscopic contaminants. This ensures the new rubber edge glides smoothly across the surface rather than "chattering" or tearing on jagged debris. A clean windshield can double the lifespan of your new wiper blades and significantly improve night-driving clarity during rainstorms.

2. Check Your Wiper Arm Tension

If your new blades are leaving streaks in the center of the sweep, the problem might not be the blade, but the wiper arm spring. Over 50+ years, the internal springs in VW wiper arms can lose their tension. Before securing the new blade, ensure the arm has a strong "snap" back toward the glass. If the arm feels weak, you may need to gently bend the arm or replace the arm assembly to ensure the 10-inch blade makes full contact across the entire arc of the windshield.

3. Off-Season Maintenance and UV Protection

The rubber on wiper blades is highly susceptible to UV damage and dry rot, especially on cars that sit in the sun or are stored in dry garages. If your Volkswagen is heading into long-term storage or won''t be driven in the rain for several months, consider lifting the arms off the glass or placing a small block of wood under the arm to keep the rubber from taking a "set" or sticking to the glass. Additionally, wiping the rubber element with a damp microfiber cloth once a month will remove dust that can cause scratches the next time you turn the wipers on.