Push Rod Tubes, Nylon Spring Loaded, 8 Pieces

EMPI Nylon Spring-Loaded Push Rod Tubes - 8 Piece Set

Vehicle Fitment and Compatibility

These EMPI spring-loaded push rod tubes (Part #4009) are designed for all 1200cc to 1600cc air-cooled Volkswagen engines. This includes the VW Beetle, Karmann Ghia, Type 2 Bus, and Type 3. Fabricated from heat-resistant, high-impact nylon, these tubes serve as a durable and cost-effective alternative to expensive aluminum telescoping tubes while providing the same ease of maintenance.

Pro Tech Tips for Installation

Tip 1: No Head Removal Required. The greatest benefit of this spring-loaded design is the ability to replace leaking tubes without removing the cylinder heads. Simply remove your rocker arms and push rods, carefully remove the old damaged tubes, and compress these spring-loaded replacements into place for a fast, effective repair.

Tip 2: Lubricate the Seals. Before installation, apply a light coat of engine oil or a small amount of assembly lube to the included rubber seals. This allows the seals to slide smoothly into the engine case and cylinder head bores without binding or tearing, which is essential for achieving a 100% leak-proof seal.

Tip 3: Verify Proper Seating. After popping the tubes into position, give each tube a slight twist. This helps ensure the seals are centered and fully seated in the bores. Because these are nylon, ensure they are clear of any sharp metal burrs on the engine case or head that could score the material during the installation process.