NOSE CONES for Type 3 Squareback 1967
    Items:
    1–10 of 10
  
                Sort by:
                Recommended 
            
            
        - 
          
Replacement nose cone for Type 1 VW transmissions. This bolts to the end of the trans and the shift selector comes through the end. These are easily broken on offroad cars when the transmission is not properly strapped into the chassis and the shock loads get transfered into the 2 bolt mount at the front. The mounts will break off leaving the rear to hold everything upOnly 1 left in stock
 
 Beetle Type 1: 61-7/72
 Ghia: 61-7/72
 Type 3: 62-7/72
- 
          
Nose cone to chassis boot. The is the transmission seal and will keep debris out of the pan around the nose cone. Sold eachOnly 4 left in stock
 
 Beetle Type 1: 52-1/2-79
 Bus Type 2: 60-67
 Ghia: 56-74
- 
          
Type 1 nose cone gasket for your vw beetleOnly 12 left in stock
 
 Beetle Type 1: 52-1/2-79
 Bus Type 2: 60-67
 Ghia: 56-74
- 
          
Replace your worn out shift bushing with this new one. Includes a new brass bushing to tap into the nose cone and a new rubber sealOnly 2 left in stock
 
 Beetle: All Years
 Transmission Type: All Type 1
- 
          
Replacement bushing for late transmissions shift selectorOnly 0 left in stock
 
 
 Fitment:
 Beetle: 69-75
 Bus Type 2: 69-75
- 
          
Replace your worn out shift bushing with this new one. Includes a new brass bushing to tap into the nose conelOnly 78 left in stock
 
 NOTE: This is the brass bushing ONLY and does not include the seal. Use seal 001-301-209A
 
 Fitment:
 Beetle: 61-68
 Bus Type 2: 61-67
- 
          
Replace your worn out shift bushing with this new one. Includes a new brass bushing to tap into the nose coneOnly 63 left in stock
 
 NOTE: This is the brass bushing ONLY and does not include the seal. Use seal 001-301-209A
 
 Fitment:
 Beetle: 69-79
 Bus Type 2: 69-75
- 
          
This bushing allows you to no use a seal on the early nose cones. Includes a new brass bushing to tap into the nose conelOnly 88 left in stock
 
 NOTE: This is the brass bushing ONLY and does not include the seal. Use seal 001-301-227
 
 Fitment:
 Beetle: 61-66
 Bus Type 2: 61-66
- 
          
Replacement seal holder. Includes a new brass bushing to tap into the nose conelOnly 2 left in stock
 
 NOTE: This is the brass bushing ONLY and does not include the seal. Use seal 001-301-209A
 
 Fitment:
 Beetle: 67-68
 Bus Type 2: 67-68
- 
          
Replacement nose cone seal. Presses into the brass housing at the end of your nose cone on type 1 applicationsOnly 6 left in stock
 
 Beetle: All years
 Transmission Type: All Type 1