3-Piece Firewall Kit, Louvered, for Type 1 Beetle

OVERVIEW

Give your air-cooled engine bay the ultimate transformation with the EMPI 3-piece louvered stainless steel firewall kit. This isn''t just about hiding old, greasy paint or weathered sound-deadening material; it''s about creating a mirror-like finish that reflects the hard work you''ve put into your engine build. The louvered design adds a classic performance aesthetic that has been a staple in the VW scene for decades, providing a textured, high-end look that catches the light and draws the eye of every spectator at the car show. Crafted from high-quality stainless steel, these panels are designed to resist corrosion and stand up to the high-heat environment of your Volkswagen''s engine compartment without losing their brilliant luster over time.

Beyond the undeniable visual upgrade, this firewall kit serves a practical purpose by acting as an additional heat shield between your engine and the passenger cabin. The three-piece design ensures comprehensive coverage, wrapping around the sides of the engine bay to provide a seamless, finished appearance that makes even a daily driver look like a professional show-car build. Whether you are running a stock 1600cc or a high-performance stroker engine with dual carburetors, these panels reflect radiant heat and make cleaning up oil splatters or road grime significantly easier than it would be on a traditional painted surface. It''s an essential upgrade for any enthusiast looking to combine classic Cal-look style with modern durability and ease of maintenance.

FITMENT

SPECS

• Material: High-Grade Polished Stainless Steel
• Kit Type: 3-Piece Set (Left Side, Right Side, and Center Firewall)
• Design: Die-stamped Louvered Style
• Finish: Mirror Polished
• Corrosion Resistance: High
• Manufacturer: EMPI
• Part Number: 62-3020-0
• Included: Three individual panels for full engine bay coverage

PRO TIPS

1. Preparation is Key for a Flush Fit

Before you begin the installation, it is absolutely critical to remove any old, crumbling tar boards or insulation from the existing firewall. If you try to install the stainless panels over old debris, they will not sit flat, and you''ll end up with unsightly gaps or rattles. Use a putty knife and some adhesive remover to get the metal surface as clean as possible. This ensures that the new 3-piece kit sits tight against the body, giving you that professional, factory-installed look that won''t shift or vibrate while you''re cruising down the highway.

2. Choosing the Right Fasteners

While many enthusiasts use short self-tapping sheet metal screws to secure the panels, some prefer a cleaner look. If you don''t want screw heads showing, you can use a high-temp automotive silicone adhesive or heavy-duty hook-and-loop strips to secure the panels. However, if you choose the screw method, we highly recommend pre-drilling small pilot holes and using stainless steel screws to match the panels. This prevents the screws from rusting over time and ensures the entire assembly remains looking pristine for years to come. Just be careful of what is behind the firewall (like your fuel tank or wiring) before you start drilling!

3. Protect the Finish During Install

Most stainless steel firewall kits come with a thin plastic protective film on the polished side. DO NOT peel this off until the panels are fully installed and fastened. The installation process often involves a bit of wiggling and positioning in tight spaces, and it is very easy to accidentally scratch the mirror finish with a tool or a fingernail. Once the panels are securely in place, peel back the film to reveal the flawless shine. After the film is removed, use a high-quality microfiber cloth and a quick-detailer spray to remove any fingerprints and keep the stainless steel looking like a mirror.