Disc Brake Kit, 5 on 4.5 Ford pattern, Long Spline
AC598184
Nodular iron bracket will not bend and keep proper alignment of caliper to the rotor.
Rotors come drilled with pilot holes for Ford / Chevy pattern.
Will fit 1967 with long spline axle only.
No emergency brake.
Note: Requires two longer 25 inch metal brake lines (113611764B)
Stud Installation Note:These rotors are drilled for the correct stud size but must still be reamed to the finish size to obtain the proper press fit. Skipping this step will result in improperly installed studs or damage to the rotor.
Includes the following:
(2) Rear CF Brake Rotors 5 x 4.5 / 5 x 4.75 Ford / Chevy bolt patterns
(2) Brake Calipers with pads
(2) Nodular Iron Caliper Brackets
(1) Rear seal kit
(1) Mounting Hardware
(1) Instruction Sheet
Rotors are threaded for 12mm and 14mm studs.
5/205, irs 68-72 Swing Axle 68
Rear End: 68 Swing 68-72 IRS
Bolt Pattern: 5 on 205mm
Beetle Type 1: 68-72
Rotors come drilled with pilot holes for Ford / Chevy pattern.
Will fit 1967 with long spline axle only.
No emergency brake.
Note: Requires two longer 25 inch metal brake lines (113611764B)
Stud Installation Note:These rotors are drilled for the correct stud size but must still be reamed to the finish size to obtain the proper press fit. Skipping this step will result in improperly installed studs or damage to the rotor.
Includes the following:
(2) Rear CF Brake Rotors 5 x 4.5 / 5 x 4.75 Ford / Chevy bolt patterns
(2) Brake Calipers with pads
(2) Nodular Iron Caliper Brackets
(1) Rear seal kit
(1) Mounting Hardware
(1) Instruction Sheet
Rotors are threaded for 12mm and 14mm studs.
5/205, irs 68-72 Swing Axle 68
Rear End: 68 Swing 68-72 IRS
Bolt Pattern: 5 on 205mm
Beetle Type 1: 68-72
Regular Product
Nodular iron bracket will not bend and keep proper alignment of caliper to the rotor.
Rotors come drilled with pilot holes for Ford / Chevy pattern.
Will fit 1967 with long spline axle only.
No emergency brake.
Note: Requires two longer 25 inch metal brake lines (113611764B)
Stud Installation Note:These rotors are drilled for the correct stud size but must still be reamed to the finish size to obtain the proper press fit. Skipping this step will result in improperly installed studs or damage to the rotor.
Includes the following:
(2) Rear CF Brake Rotors 5 x 4.5 / 5 x 4.75 Ford / Chevy bolt patterns
(2) Brake Calipers with pads
(2) Nodular Iron Caliper Brackets
(1) Rear seal kit
(1) Mounting Hardware
(1) Instruction Sheet
Rotors are threaded for 12mm and 14mm studs.
5/205, irs 68-72 Swing Axle 68
Rear End: 68 Swing 68-72 IRS
Bolt Pattern: 5 on 205mm
Beetle Type 1: 68-72
Rotors come drilled with pilot holes for Ford / Chevy pattern.
Will fit 1967 with long spline axle only.
No emergency brake.
Note: Requires two longer 25 inch metal brake lines (113611764B)
Stud Installation Note:These rotors are drilled for the correct stud size but must still be reamed to the finish size to obtain the proper press fit. Skipping this step will result in improperly installed studs or damage to the rotor.
Includes the following:
(2) Rear CF Brake Rotors 5 x 4.5 / 5 x 4.75 Ford / Chevy bolt patterns
(2) Brake Calipers with pads
(2) Nodular Iron Caliper Brackets
(1) Rear seal kit
(1) Mounting Hardware
(1) Instruction Sheet
Rotors are threaded for 12mm and 14mm studs.
5/205, irs 68-72 Swing Axle 68
Rear End: 68 Swing 68-72 IRS
Bolt Pattern: 5 on 205mm
Beetle Type 1: 68-72
SHIPPING: Free shipping on all orders exceeding $74.99. All orders under $74.99 will be shipped for a flat fee of $9.99 Or $6.99 for orders less than $24.99. Shipping rates are for the 48 continental United States. Areas outside the 48 states, shipping will be calculated using the best shipping price available. We reserve the right to use any shipping carrier unless the order has had a upgrade. If any sales or price matching discount drops you below the free shipping amount, shipping will be charged.
We accept the following payment methods:
To replace this text with your store's actual info on payment methods, go to "Catalog -> Product tabs" and edit the Payment methods page.
RETURNS: Returns will be accepted within 30 days of receipt. If the item was shipped via Free Shipping, the shipping charges may be deducted from your return. Please print the original invoice and include it with the return. No returns on custom built or special ordered merchandise.
PLEASE NOTE: We do not pay for return shipping unless the item received is incorrect. If you have ordered the wrong part, we are happy to take it back but we do not cover the shipping cost.