FRONT BUSHING KITS for Type II Bus Double Cab 1966

Inner and Outer Urethane Axle Beam Bushing Kit for King & Link Pin front beams w/Needle Bearings.

1.75 OD
1.5 inches ID
7.75 inches Long
2 inches OD on outer seal portion

These will replace your needle bearings and the seal. They are made to replace both the inner and the outer needle bearing

Suspension: King Pin
Replaces: All Needle Bearings
Quantity: 4 Pieces

BUGPACK BRAND Pro-thane Axle Beam Tube Seals for King/Link Pin Beams.

These seals will go between the front trailing arms and the beam to keep out harmfull particles. This is a must as stock seals don't seal as well

Suspension: King Pin
Replaces: Trailing Arm Seals
Quantity: 4 Pieces

BUGPACK BRAND

Front bushing kit for King Link Pin beams. The are original PROTHANE by Bugpack.

Inner and Outer Bearing replacement

Suspension: King Pin
Replaces: Needle Bearings
Quantity: 4 Pieces

Outer King Pin front suspension seals.

Urethane Axle Bushing Kit for King/Link Pin Front Beams w/Needle Bearings.

These bushings will replace your stock needle bearings and seals. The particular part will replace only the outer needle bearings.

1.81 inches OD
1.5 inches ID
.475 inches Long
2.07 inches seal end portion OD

Suspension: King Pin
Replaces: Outer Needle Bearing
Quantity: 4 Pieces

BUGPACK BRAND

Front bushing kit for King Link Pin beams. The are original PROTHANE by Bugpack.

Outer Bearing replacement

Suspension: King/Link Pin
Replaces: Needle Bearings
Quantity: 4 Pieces

Outer seals for your King Pin front suspension.

Urethane Axle Beam Bushing Kit for King/Link Pin With Micarta Bushing. 4 pc. set.


1.82 inches OD
1.5 inches ID
.375 inches Long
2.1 inches Seal portion OD

Suspension: King Pin
Replaces: Micarta Bushings
Quantity: 4 Pieces

BUGPACK BRAND

Front bushing kit for Ball Joint beams. The are original PROTHANE by Bugpack.

Outer Bearing replacement

Suspension: Ball Joint
Replaces: Needle Bearings
Quantity: 4 Pieces

BUGPACK BRAND

Front bushing kit for Ball Joint beams. The are original PROTHANE by Bugpack.

Inner and Outer Bearing replacement

Suspension: Ball Joint
Replaces: Needle Bearings
Quantity: 4 Pieces

BUGPACK BRAND Pro-thane Axle Beam tube Seals for Ball Joint Beams.

These seals will go between the front trailing arms and the beam to keep out harmfull particles. This is a must as stock seals don't seal as well.

Suspension: Ball Joint
Replaces: Trailing Arm Seals
Quantity: 4 Pieces

BUGPACK BRAND
USE WITH EMPI ALUMINUM BEAM W/O SHOCK TOWERS
These are original PROTHANE by Bugpack.

Fits 46mm Tubes



Suspension: Aluminum Beam
Replaces: Needle Bearings
Quantity: 4 Pieces

Inner and Outer Urethane Beam Bushing Kit For Ball Joint Beam.

This kit will replace the inner and outer needle bearings on your ball joint front suspension. It will also replace the seal. Great alternative to pressing in new needle bearings

Large Size
1.75 inches OD
1.42 inches ID
6.313 inches Long

Small Size
1.75 inches OD
1.45 inches ID
6 inches Long

Suspension: Ball Joint
Replaces: Needle Bearings
Quantity: 4 Pieces

BUGPACK BRAND

Front bushing kit for Aluminum Beams. The are original PROTHANE by Bugpack.

Fits 45mm Tubes

Inner and Outer Bearing replacement

Suspension: Aluminum Beam
Replaces: Needle Bearings
Quantity: 4 Pieces

BUGPACK BRAND

Front bushing kit for VW Bus. The are original PROTHANE by Bugpack.

Fits 46mm Tubes

Inner and Outer Bearing replacement

Bus Type 2: 55-63
Replaces: Needle Bearings
Quantity: 4 Pieces

BUGPACK BRAND
For Narrowed Beams.

Front bushing kit for VW Bus. The are original PROTHANE by Bugpack.

53mm OD 50mm ID to 43mm ID


Inner and Outer Bearing replacement

Bus Type 2: 64-67
Replaces: Needle Bearings
Quantity: 4 Pieces

BUGPACK BRAND

Front bushing kit for Micarta front struts. The are original PROTHANE by Bugpack.

Inner and Outer Bearing replacement

Suspension: Micarta
Replaces: Needle Bearings
Quantity: 4 Pieces

Urethane Axle Beam Tube Seals for Ball Joint Beam.

These go between the trailing arm and the beam to keep out harmfull particles. A must when offroading

Suspension: Ball Joint
Replaces: Trailing Arm Seals
Quantity: 4 Pieces

BUGPACK BRAND

Front bushing kit for Micarta front struts. The are original PROTHANE by Bugpack.

Outer Replacement Only

Suspension: Micarta
Replaces: Needle Bearings
Quantity: 4 Pieces

Outer Urethane Beam Bushing Kit for Ball Joint Beam.

These bushings will replace the seal and the outer needle bearing on your ball joint front suspension

Suspension: Ball Joints
Replaces: Outer Needle Bearing
Quantity: 4 Pieces

BUGPACK BRAND


Front bushing kit for VW Bus. The are original PROTHANE by Bugpack.


Fits 46mm Tubes


Inner and Outer Bearing replacement


Bus Type 2: 68-79

Replaces: Needle Bearings

Quantity: 4 Pieces

Needle bearing for King pin front beams.

Fitment:
Beetle Type 1: 60-65 Upper/Lower
Ghia: 60-65 Upper/Lower

Beetle Type 1: 66-78 Upper
Ghia: 66-74 Upper

Needle bearing for Ball Joint front beams.

Fitment:
Beetle Type 1: 66-78 Lower
Type 3: 61-73 Lower
Ghia: 66-74 Lower

4 Pack. These take care of what the stock needle bearings would have in a king pin front end. They provide support and sealing.

The strength and durability of urethane will out-last and out-perform standard rubber products in every application.

7 1/4 inches long for aluminum or steel beams 2.000 inches tube/.120 wall

NOTE: these have a little bit thicker outer collar and work in our aluminum beams. WILL NOT FIT EMPI BRAND ALUMINUM BEAMS.

Suspension: King Pin Aluminum
Replaces:
Quantity: 4 Pieces

Urethane axle beam bushings for all aluminum and warrior style beams.

These replace the needle bearings if offroad beams. There are a variety of options for bushings so please measure your beam prior to ordering to insure your getting the correct version.

Diameter of Beam: 1-3/4 inches
Length: 6-3/8 inches
Diameter of Seal: 2.090 inches

Suspension: King Pin Steel
Replaces: Needle Bearings
Quantity: 4 Pieces

Urethane Axle Beam Bushing Kit for Aluminum King/Link Pin Beams w/ 45mm Tubes.

This is a must if you have a aluminum or steel beam with 2 inches tube .120 wall cross tubes. WILL NOT FIT EMPI BRAND ALUMINUM BEAMS

These are 6 inches long
This takes care of what the stock needle bearings would have done and provides the support for your trailing arm to pivot on. Also acts as a seal to keep out harmfull particles

Suspension: King Pin Aluminum
Replaces: Needle Bearings
Quantity: 4 Pieces

Delrin axle beam bushings. These are much harder and stronger than standard urethane and will offer a extended life. These fit most aluminum and warrior style beams.

These replace the needle bearings if offroad beams. There are a variety of options for bushings so please measure your beam prior to ordering to insure your getting the correct version.

Sold Each

Diameter at Beam: 1-3/4 inches
Length: 6-3/8 inches
Diameter at Seal: 2.090 inches .

SOLD EACH

Total kits offer the opportunity to obtain all the parts necessary to complete the conversion of yoru suspension system to urethane. Total kits save time and money.

Includes
Beam Bushings
Spring Plate Inner & Outer Bushings
Transmission Mounts
Steering Coupler
Shift Coupler
Tie Rod Covers
Bump Stops.

Total kits offer the opportunity to obtain all the parts necessary to complete the conversion of yoru suspension system to urethane. Total kits save time and money.

Includes
Beam Bushings
Spring Plate Inner & Outer Bushings
Transmission Mounts
Steering Coupler
Shift Coupler
Tie Rod Covers
Bump Stops
IRS Pivot Bushings.

Total kits offer the opportunity to obtain all the parts necessary to complete the conversion of yoru suspension system to urethane. Total kits save time and money.

Includes
Beam Bushings
Spring Plate Inner & Outer Bushings
Transmission Mounts
Steering Coupler
Shift Coupler
Tie Rod Covers
Bump Stops
IRS Pivot Bushings.

Total kits offer the opportunity to obtain all the parts necessary to complete the conversion of yoru suspension system to urethane. Total kits save time and money.

Includes
Strut Bushings
Spring Plate Inner & Outer Bushings
Transmission Mounts
Steering Coupler
Shift Coupler
Tie Rod Covers
IRS Pivot Bushings.

Polyurethane assembly lub is specially formulated for our beam bushings and rear torsion bushings.

Keep them lubricated and squeak free
1/2 oz
Pack of 3